Heater Range
Part of our comprehensive range of heater hire solutions this powerful 375kW heater is easy to transport install and operate with automation and an integrated thermostat for complete control. The robust design makes Acclimatise heaters suitable for numerous industrial applications from warehouses to construction sites. Call now for more information.
Part of our comprehensive range of heater hire solutions this 180kW heater is easy to transport install and operate with automation and an integrated thermostat for complete control. The robust design makes them suitable for numerous industrial applications from agriculture to ship building. Call now for more information.
Robust & reliable 227kW indirect fired heater perfect for delivering fast effective heating to large buildings such as warehouses workshops & industrial units.
-
- Burner cover: protects the burner against blows dust water weather & collects diesel fuel
-
- Burner supplied with snorkel jack to ensure clean air combustion through connection with outdoor air uptake duct
-
- Heat exchanger designed with high performance fans which ensure high efficiency
-
- Sturdy attachment rods allow for movement on any floor
-
- Bearing structure with removable panels for interior washing
-
- Panels with reinforcement cross pleats to ensure superior rigidity & strength
-
- Ventilator conforms with European directives
-
- Low sound level - below 69db at 2 metres
-
- 7-blade fan with high performance for uniform diffusion of warm air through duct
-
- Control rear electrical panel - Supplied with a sturdy metal cover to prevent damage & unauthorised access
-
- Service front electrical panel - Located inside the burner cover lid to prevent contact with dust water & snow
Robust and reliable 218kW indirect fired heater perfect for delivering fast effective heating to marquees warehouses workshops & industrial units.
-
- Burner cover: protects the burner against blows dust water weather & collects diesel fuel
-
- Burner supplied with snorkel jack to ensure clean air combustion through connection with outdoor air uptake duct
-
- Heat exchanger designed with high performance fans which ensure high efficiency
-
- Sturdy attachment rods allow for movement on any floor
-
- Bearing structure with removable panels for interior washing
-
- Panels with reinforcement cross pleats to ensure superior rigidity & strength
-
- Ventilator conforms with European directives
-
- Low sound level - below 67db at 2 metres
-
- 7-blade fan with high performance for uniform diffusion of warm air through duct
-
- Control rear electrical panel - Supplied with a sturdy metal cover to prevent damage & unauthorised access
-
- Service front electrical panel - Located inside the burner cover lid to prevent contact with dust water & snow
Robust and reliable 137kW indirect fired heater perfect for delivering fast and effective heating to marquees warehouses workshops and industrial units.
-
- Burner cover: protects the burner against blows dust water weather & collects diesel fuel
-
- Burner supplied with snorkel jack to ensure clean air combustion through connection with outdoor air uptake duct
-
- Heat exchanger designed with high performance fans which ensure high efficiency
-
- Sturdy attachment rods allow for movement on any floor
-
- Bearing structure with removable panels for interior washing
-
- Panels with reinforcement cross pleats to ensure superior rigidity & strength
-
- Ventilator conforms with European directives
-
- Low sound level - below 67db at 2 metres
-
- 7-blade fan with high performance for uniform diffusion of warm air through duct
-
- Control rear electrical panel - Supplied with a sturdy metal cover to prevent damage & unauthorised access
-
- Service front electrical panel - Located inside the burner cover lid to prevent contact with dust water & snow
Robust & reliable 81kW indirect fired heater perfect for delivering fast & effective heating to marquees events & temporary structures.
-
- Built-in diesel burner
-
- Set to be connected to a thermostat/humidistat/timer
-
- 1.5M power cord & plug
-
- AISI 430 stainless steel combustion chamber with three smoke revolutions
-
- Automatic post ventilation of unit
-
- Electronic flame control
-
- Safety thermostat
-
- Fuel feed lines in hydrocarbon resistant rubber
-
- Tank in tough hydrocarbon resistant polythene
-
- Fuel tank drain plug
-
- Electric control panel
Robust & reliable 51kW indirect fired heater perfect for delivering fast & effective heating to marquees events & temporary structures.
-
- Built-in diesel burner
-
- Set to be connected to a thermostat/humidistat/timer
-
- 1.5M power cord & plug
-
- AISI 430 stainless steel combustion chamber with three smoke revolutions
-
- Automatic post ventilation of unit
-
- Electronic flame control
-
- Safety thermostat
-
- Fuel feed lines in hydrocarbon resistant rubber
-
- Tank in tough hydrocarbon resistant polythene
-
- Fuel tank drain plug
-
- Electric control panel
Robust & reliable 29kW indirect fired heater perfect for delivering fast & effective heating to marquees events & temporary structures.
-
- Built-in diesel burner
-
- Set to be connected to a thermostat/humidistat/timer
-
- 1.5M power cord & plug
-
- AISI 430 stainless steel combustion chamber with three smoke revolutions
-
- Automatic post ventilation of unit
-
- Electronic flame control
-
- Safety thermostat
-
- Fuel feed lines in hydrocarbon resistant rubber
-
- Tank in tough hydrocarbon resistant polythene
-
- Fuel tank drain plug
-
- Electric control panel
Robust & reliable 19kW indirect fired heater perfect for delivering fast & effective heating to small party tents toilet tents etc.
-
- Built-in diesel burner
-
- Set to be connected to a thermostat/humidistat/timer
-
- 1.5M power cord & plug
-
- AISI 430 stainless steel combustion chamber with three smoke revolutions
-
- Automatic post ventilation of unit
-
- Electronic flame control
-
- Safety thermostat
-
- Fuel feed lines in hydrocarbon resistant rubber
-
- Tank in tough hydrocarbon resistant polythene
-
- Fuel tank drain plug
-
- Electric control panel
El-Björn’s new generation of heating and drying fans has been developed to meet future heating and drying requirements. These high performance energy-efficient drying fans have two power settings. Robust and practical with a lightweight design in powder-coated corrosion-resistant galvanized sheet steel. These units gives a high temperature increase (ΔT) and move large volumes of air. The design of the fan and housing maximize the throw and spread of warm air. Capable of maintaining temperatures in areas of 80–1500 m². Accessible modular construction makes cleaning/servicing easy. Ensures easy access to the electrical box under the service door.
• Two filters for consistent high-volume air flow and lower noise level
• Improved filters with additional pre-filter in a choice of filter grades. G4 standard filter
• Textile or metal air distributor spreads air around the room and gives 360 degree
coverage and maximum throw
• The very compact chassis means that the fan units can be placed in confined spaces
such as stairwells marquees and apartments
• The lightweight design makes them easy to lift move transport or hang from a wall
• Accessible modular construction
• Removable top for easy cleaning/servicing
• High temperature increase (ΔT) and large air flows for maximum energy efficiency
• Automatic cool-down extends product life
• Smart control card
• Lockable password-protected display
• Choice of operating modes: Drying Event Heating
• Electronic thermostat for room temperature control
El-Björn’s new generation of heating and drying fans has been developed to meet future heating and drying requirements. These high performance energy-efficient drying fans have two power settings. Robust and practical with a lightweight design in powder-coated corrosion-resistant galvanized sheet steel. These units gives a high temperature increase (ΔT) and move large volumes of air. The design of the fan and housing maximize the throw and spread of warm air. Capable of maintaining temperatures in areas of 80–1500 m². Accessible modular construction makes cleaning/servicing easy. Ensures easy access to the electrical box under the service door.
• Two filters for consistent high-volume air flow and lower noise level
• Improved filters with additional pre-filter in a choice of filter grades. G4 standard filter
• Textile or metal air distributor spreads air around the room and gives 360 degree
coverage and maximum throw
• The very compact chassis means that the fan units can be placed in confined spaces
such as stairwells marquees and apartments
• The lightweight design makes them easy to lift move transport or hang from a wall
• Accessible modular construction
• Removable top for easy cleaning/servicing
• High temperature increase (ΔT) and large air flows for maximum energy efficiency
• Automatic cool-down extends product life
• Smart control card
• Lockable password-protected display
• Choice of operating modes: Drying Event Heating
• Electronic thermostat for room temperature control
El-Björn’s new generation of heating and drying fans has been developed to meet future heating and drying requirements. These high performance energy-efficient drying fans have two power settings. Robust and practical with a lightweight design in powder-coated corrosion-resistant galvanized sheet steel. These units gives a high temperature increase (ΔT) and move large volumes of air. The design of the fan and housing maximize the throw and spread of warm air. Capable of maintaining temperatures in areas of 80–1500 m². Accessible modular construction makes cleaning/servicing easy. Ensures easy access to the electrical box under the service door.
• Two filters for consistent high-volume air flow and lower noise level
• Improved filters with additional pre-filter in a choice of filter grades. G4 standard filter
• Textile or metal air distributor spreads air around the room and gives 360 degree
coverage and maximum throw
• The very compact chassis means that the fan units can be placed in confined spaces
such as stairwells marquees and apartments
• The lightweight design makes them easy to lift move transport or hang from a wall
• Accessible modular construction
• Removable top for easy cleaning/servicing
• High temperature increase and large air flows for maximum energy efficiency
• Mechanical thermostat for room temperature control
The 100kW Direct Fired Gas Heater produces large scale heating ideal for construction agricultural & manufacturing applications easy to use efficient & reliable wherever you need it.
-
- 100kW Direct Fired Gas Heater
-
- Large scale heating output
-
- Built to last & perfect for rugged use
-
- Thermostatically controlled
-
- Construction agricultural & manufacturer applications
The 60kW Direct Fired Gas Heater produces large scale heating ideal for construction agricultural & manufacturing applications easy to use efficient & reliable wherever you need it.
-
- 60kW Direct Fired Gas Heater
-
- Large scale heating output
-
- Built to last & perfect for rugged use
-
- Thermostatically controlled
-
- Construction agricultural & manufacturer applications
An 80kW Electric Fan Heater for heavy duty applications such as shipping large scale space heating & industrial heating high output & fully featured.
-
- 80kW Industrial Heater
-
- Adjustable Thermostat
-
- Lockable Castors
-
- Clean odourless & fume free heating
-
- Auto run on
-
- Heavy duty build
-
- Remote thermostat socket
-
- Designed for Industrial use
-
- Can be used with long runs of flexible duct
-
- Variable Heat Output
-
- Powerful contra rotating fan
The most powerful 63amp heater available built for industrial use delivering 42kW of clean heat.
-
- 42kW Industrial Heater
-
- Adjustable Thermostat
-
- Lockable Castors
-
- Clean odourless & fume free heating
-
- Auto run on
-
- Variable Heat Output
-
- Remote thermostat socket
-
- Designed for Industrial use
-
- Can be used with long runs of flexible duct
-
- Thermal shut down & 24v control circuit for safety
-
- Powerful air movement; 1300-2000 cfm of heated air at 800 pa
-
- Small footprint VS heat output
A large powerful industrial fan heater for site use or large scale space heating
-
- 18kW Industrial Heater
-
- Adjustable Thermostat
-
- Lockable Castors
-
- Clean odourless & fume free heating
-
- Can duct up to 10M
-
- Designed & built for site & office use
-
- Single or mutiple outlets for flexible heat delivery
-
- Thermal shut down for protection
A 3kW electric space heater perfect for medium sized offices small & portable powerful & fast.
-
- 3kW Industrial Heater
-
- Adjustable Thermostat
-
- Clean odourless & fume free heating
-
- Can duct up to 2M
-
- Designed & built for site & office use
-
- Thermal shut down for protection
The Infrared Heater is designed to deliver 3kW of heating quickly & safely through its infrared emmiters portable & easy to use.
-
- Safe & comfortable use
-
- Spot heating for larger areas
-
- Electric - no fuel requirement
-
- Fast & efficient heating
The electric portable radiator - perfect for office home or class room heating. Economical manoeuvrable & controllable.
-
- Safe & comfortable use
-
- Electric - no fuel requirement
-
- Luminous switches
-
- 3 heat settings